Normes

STABILITY TESTING: PHOTOSTABILITY TESTING OFNEW DRUG SUBSTANCES AND PRODUCTS

QUALITY OF BIOTECHNOLOGICAL PRODUCTS:STABILITY TESTING OF  BIOTECHNOLOGICAL/BIOLOGICALPRODUCTS

Photovoltaic (PV) module safety qualification - Part 1: Requirements for constructionIEC 61730-1:2016 specifies and describes the fundamental construction...

IEC TS 62788-7-2:2017(E) defines test procedures to characterize the weatherability of polymeric component materials used in photovoltaic (PV)...

TOOL AND DIE STEELS - SPECIFICATIONDescribes the requirement for plain carbon and alloy tool and by steel in...

Method of Test for Smoothness/Roughness of Paper

Identification cards -- Test methods -- Part 2: Cards with magnetic stripesISO/IEC 10373-2:2015 defines test methods for characteristics...

Textiles -- Essais de solidité des coloris -- Partie A11: Détermination des degrés de solidité des coloris par...

Textiles - Essais de solidité des teinturesPartie B02: Solidité des teintures à la lumière artificielle: Lampe à arc...

Textiles - Tests for colour fastness - Part B04: Colour fastness to weathering: Xenon arc test

Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high...

Textiles - Tests for colour fastness - Part B07: Colour fastness to light of textiles wetted with artificial...

Textiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation

Textiles - Tests for colour fastness -Part C01: Colour fastness to washing: Test 1 This part of ISO...

Textiles -Tests for colour fastness - Part C03: Colour fastness to washing: Test 3 This part of ISO...

Textiles - Tests for colour fastness - Part C04: Colour fastness to washing: Test 4 This part of...

Textiles - Tests for colour fastness - Part C05: Colour fastness to washing: Test 5 This part of...

Textiles - Tests for colour fastness -- Part C06: Colour fastness to domestic and commercial laundering ISO 105-C0...

Textiles -- Tests for colour fastness -- Part C08: Colour fastness to domestic and commercial laundering using a...

Textiles - Tests for colour fastness - Part C09: Colour fastness to domestic and commercial laundering -- Oxidative...

Textiles - Tests for colour fastness - Part C10: Colour fastness to washing with soap or soap and...

Textiles -Tests for colour fastness - Part D01: Colour fastness to drycleaning using perchloroethylene solvent

Textiles -- Tests for colour fastness -- Part D02: Colour fastness to rubbing: Organic solvents

Textiles - Tests for colour fastness - Part E01: Colour fastness to water

Textiles - Tests for colour fastness - Part E02: Colour fastness to sea water

Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration

Textiles -Tests for colour fastness -Part E05: Colour fastness to spotting: Acid

Textiles - Tests for colour fastness - Part E12: Colour fastness to milling: Alkaline milling ISO 105-E12 specifies...

Textiles -- Essais de solidité des teintures -- Partie P01: Solidité des teintures à la chaleur sèche (à...

Textiles -- Essais de solidité des teintures -- Partie X11: Solidité des teintures au repassage à chaud

Textiles -- Tests for colour fastness -- Part X12: Colour fastness to rubbingISO 105-X12:2016 specifies a method for...

Textiles - Tests for colour fastness - Part X18: Assessment of the potential to phenolic yellowing of materials

Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, without load

Textiles -Physiological effects - Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)

Paints and varnishes - Artificial weathering and exposure to artificial radiation - Exposure to filtered xenon-arc radiation

Deals with the testing of paints, varnishes and related products. Specifies a test method for determining under standard...

Paints and Varnishes - Exposure of coatings to artificial weathering- Exposure to fluorescent UV lamps and waterThis International...

Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light...

Technologie graphique -- Impressions et encres d'imprimerie -- Évaluation de la solidité à la lumière au moyen d'une...

Emballages - Emballages d'expédition complets et pleins -- Essais de compression et de gerbage à l'aide d'une machine...

Hygrothermal performance of building materials and products — Determination of water vapour transmission properties — Cup method ISO...

Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption

Tissue paper and tissue products — Part 5: Determination of wet tensile strength

Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket-immersion test methodISO 12625-8:2010 specifies...

Tissue paper and tissue products - Part 9: Determination of ball burst strength

Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 1: Pilling box method

Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 2: Modified Martindale method

Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 1: Martindale abrasion...

Textiles — Détermination de la résistance à l'abrasion des étoffes par la méthode Martindale — Partie 2: Détermination...

Corrugated fibreboard -- Determination of edgewise crush resistance -- Waxed edge method

Textiles — Propriétés des étoffes en traction — Partie 1: Détermination de la force maximale et de l'allongement...

Textiles — Tensile properties of fabrics — Part 2: Determination of maximum force using the grab methodISO 13934-2:201...

Determination of the slippage resistance of yarns at a seam in woven fabrics — Part 1: Fixed seam...

Textiles — Determination of the slippage resistance of yarns at a seam in woven fabrics — Part 2...

Textiles — Tear properties of fabrics — Part 1: Determination of tear force using ballistic pendulum method (Elmendorf)

Textiles — Tear properties of fabrics — Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method)

Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at breakISO 1421:2016 specifies two methods for...

Vêtements de protection — Protection contre les flammes — Méthode d'essai pour la propagation de flamme limitée ISO...

Plastics -- Film and sheeting -- Determination of gas-transmission rate -- Part 1: Differential-pressure methodsISO 15105-1:2007 specifies two...

lastics - Film and sheeting -- Determination of gas-transmission rate - Part 2: Equal-pressure method

Plastics -- Film and sheeting -- Determination of water vapour transmission rate -- Part 2: Infrared detection sensor method

Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 3: Electrolytic detection sensor method

Paints and varnishes - Scratch testSpecifies a test method for determining under defined conditions the resistance of a...

Peintures et vernis -- Détermination de la dureté du feuil par l'essai de dureté crayon L'ISO 15184:2012 spécifie...

Paints, varnishes and printing inks -- Determination of fineness of grind ISO 1524:2013 specifies a method for determining...

Paper and board -- Determination of z-directional tensile strengthSpecifies a method for the determination of z-directional tensile strength...

Paints and varnishes - Methods of exposure to laboratory light sources - Part 1: General guidance

Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps

Corrosion of metals and alloys -- Corrosion in artificial atmosphere -- Accelerated corrosion test involving exposure under controlled...

Leather - Determination of abrasion resistance - Part 2: Martindale ball plate method

Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method (20 mm/min)

Papier — Détermination de la résistance au déchirement — Méthode Elmendorf -- ISO 1974:2012 specifies a method for...

Textiles — Étoffes — Détermination de la largeur et de la longueur L'ISO 22198:2006 spécifie une méthode de...

This document specifies a method for assessing the resistance of materials or products to a humid atmosphere containing...

Packaging -- Complete, filled transport packages -- Vertical impact test by droppingPrinciple: Raising of the test package above...

Clothing for protection against infectious agents — Medical face masks — Test method for resistance against penetration by...

Textiles -- Détermination des variations dimensionnelles des étoffes -- Méthode machine accélérée

ISO 2409:2020 Paints and varnishes — Cross-cut test This document specifies a test method for assessing the resistance...

Paints and varnishes — Determination of flow time by use of flow cups Specifies a method for determining...

Papier, carton et pâtes -- Mesurage du facteur de réflectance diffuse

Papier et carton - Mesurage du facteur de réflectance diffuse dans le bleu (degré de blancheur ISO)

Papier et carton -- Détermination de l'opacité sur fond papier -- Méthode de réflexion en lumière diffuse Elle...

Papier et carton — Détermination de la résistance à la flexion

Sheet materials -- Determination of water vapour transmission rate (WVTR) -- Gravimetric (dish) method

PLASTICS - DETERMINATION OF THE GAS TRANSMISSION RATE OF FILMS AND THIN SHEETS UNDER ATMOSPHERIC PRESSURE -- MANOMETRIC...

Papier — Détermination de la résistance à l'éclatement ISO 2758:2014 spécifie une méthode de mesurage de la résistance...

Carton — Détermination de la résistance à l'éclatement L'ISO 2759:2014 spécifie une méthode de mesure de la résistance...

Peintures et vernis — Détermination de l'épaisseur du feuil Le présent document décrit des méthodes pour mesurer l'épaisseur...

Paints and varnishes - Determination of gloss value at 20 degrees, 60 degrees and 85 degrees

Paints and varnishes — Comparison of contrast ratio (hiding power) of paints of the same type and colourSpecifies...

Carton ondulé -- Détermination de l'épaisseur d'une feuille unique L'ISO 3034:2011 spécifie une méthode de détermination de l'épaisseur...

Carton ondulé -- Détermination de la résistance à la compression à plat L'ISO 3035:2011 spécifie une méthode de...

Carton ondulé -- Détermination de la résistance à la compression sur chant (méthode sans enduction de cire) L'ISO...

Paints and varnishes — Determination of resistance to humid atmospheres containing sulfur dioxideThe principle of the procedure specified...

Pâtes — Préparation des feuilles de laboratoire pour le mesurage du facteur de réflectance diffuse dans le bleu...

Textiles — Tissus — Détermination de la masse par unité de longueur et de la masse par unité...

Road vehicles - Safety glazing materials - Test methods for resistance to radiation, high temperature, humidity, fire and...

High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 2: Determination...

Polymeric materials, cellular flexible — Determination of air flow permeability

Rubber- or plastics-coated fabrics — Determination of tear resistance — Part 1: Constant rate of tear methodsISO 4674-1:201...

Rubber- or plastics-coated fabrics — Determination of tear resistance — Part 2: Ballistic pendulum method

Plastics -- Methods of exposure to laboratory light sources -- Part 2: Xenon-arc lamps ISO 4892-2 specifies methods...

Plastics -- Methods of exposure to laboratory light sources -- Part 3: Fluorescent UV lamps ISO 4892-3 specifies...

Étoffes -- Détermination de la résistance au mouillage superficiel (essai d'arrosage) -- ISO 4920:2012 specifies a spray test...

Textiles -- Détermination des variations dimensionnelles au lavage et au séchage domestiques L'ISO 5077:2007 spécifie une méthode de...

Pulps — Laboratory wet disintegration — Part 1: Disintegration of chemical pulps.ISO 5263-1:2004 specifies an apparatus and the...

Pulps — Laboratory beating — Part 2: PFI mill methodISO 5264-2:2011 specifies a method for the laboratory beating...

Pulps — Laboratory beating — Part 3: Jokro mill method Is limited to the furnishing and beating of...

Pulps — Preparation of laboratory sheets for physical testing — Part 1: Conventional sheet-former method ISO 5269-1:2005 specifies...

Plastics - Determination of tensile properties ISO 527-1:2012 specifies the general principles for determining the tensile properties of...

Papier et carton — Détermination de l'épaisseur, de la masse volumique et du volume spécifique

Papier et carton - Détermination de l'absorption d'eau - Méthode de Cobb L'ISO 535:2014 spécifie une méthode de...

Rubber- or plastics-coated fabrics -Determination of abrasion resistance - Part 1: Taber abrader

ISO 5470 – Rubber- or plastics-coated fabrics — Determination of abrasion resistance — Part 2: Martindale abrader

Papier -- Détermination de la résistance au pliage La présente Norme internationale prescrit des méthodes pour la détermination...

Papier et carton -- Détermination du lissé (Méthode Bekk)La présente Norme internationale prescrit une méthode pour la détermination...

Paper & Board - Determination of air permeance

Paper and board - Determination of air permeance (medium range) - Part 3: Bendtsen method

Paper and board - Determination of air permeance (medium range) - Part 5: Gurley method

Appareils d'essai du caoutchouc et des plastiques — Types pour traction, flexion et compression (vitesse de translation constante)...

Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in...

Textiles -Domestic washing and drying procedures for textile testing

Textile fabrics — Burning behaviour — Determination of ease of ignition of vertically oriented specimens.ISO 6940:2004 specifies a...

Textile fabrics — Burning behaviour — Measurement of flame spread properties of vertically oriented specimens.ISO 6941:2003 specifies a...

Metallic and other non organic coatings — Sulfur dioxide test with general condensation of moistureSpecifies a method for...

Papier cannelure — Détermination de la résistance à la compression à plat après cannelage en laboratoire — Partie...

Anodizing of aluminium and its alloys — Measurement of specular reflectance and specular gloss of anodic oxidation coatings...

ISO 7784-2 – Paints and varnishes — Determination of resistance to abrasion — Part 2: Method with abrasive...

Textiles -- Détermination de la résistance à la pénétration de l'eau -- Essai sous pression hydrostatique...

Plastiques -- Film et feuille -- Détermination des coefficients de frottement

Plastiques — Film et feuille — Détermination de la tension de mouillage L'ISO 8296:2003 spécifie une méthode de...

Paper and board - Determination of roughness/smoothness (air leak methods) - Part 1: General method

PAPER AND BOARD - DETERMINATION OF ROUGHNESS/SMOOTHNESS (AIR LEAK METHODS) -- PART 2: BENDTSEN METHOD

Textiles -- Test methods for nonwovens -- Part 16: Determination of resistance to penetration by water (hydrostatic pressure)ISO...

Textiles — Test methods for nonwovens — Part 4: Determination of tear resistance

Essais de corrosion en atmosphères artificielles -- Essais aux brouillards salins ISO 9227:2017 spécifie l'appareillage, les réactifs et...

Textiles -- Détermination de la perméabilité à l'air des étoffes La présente Norme internationale prescrit une méthode pour...

Plastiques - Détermination de la résistance à l'usure par galets abrasifs

Textiles — Hydrophobicité de tissus à l'aide d'un essai d'arrosage suivant la méthode Bundesmann Une méthode pour la...

Papier et carton - Résistance à la compression - Essai à faible écartement -- ISO 9895:2008 specifies a...

Partial Simulation Performance Tests - ISTA 2A tests are for packaged-products 150 lb. (68 kg) or less, and...

General Simulation Performance Tests - Test Procedure 3A is for packaged-products weighing 150 lb. (70 kg) or less...

ISTA 3B is a general simulation test for packaged-products shipped through a motor carrier (truck) delivery system, where...

ISTA 6 Series: Member Performance Tests. Test protocols created by ISTA members to meet their particular purposes and...